FUJITSU Primergy RX200 S2 - Manual (Page 43)

43
PRIMERGY RX200 S2 User’s Guide
2
Checkin
g before O
S
Inst
allatio
n
3
Exit the BIOS Setup Utility and turn off the server.
You can turn the power on/off from a client (via a LAN) by utilizing the Wakeup on LAN (WOL) function.
This function is enabled at the time of purchase. For more details, refer to "5.5.5 Turning the Power
On/Off via a LAN" ( pg.150).
Be sure to install ServerView to control the power supply via a LAN.
When ServerView is not installed, the server is not turned off automatically after OS shutdown.
■ SCSI Setup Utility
The SCSI Setup Utility is used for setting the onboard SCSI array controller of this server.
Check or change settings as necessary before installation. Refer to "8.3 SCSI Setup Utility" ( pg.233).