Franke Consumer Products FFP S700 - Manual (Page 7)

7
ENGLISH
Connect the supply line
Connect the supply line. In order to guarantee a long use of the pro-
duct, install the angle valve equipped with filter and clean them regu-
larly. Do not allow the supply tube to twist or bend sharply.
Flush out debris from water lines and faucet.
1. Pull spray hose out of the faucet spout and point the
open end towards the sink drain.
2. Open faucet handle - cold side first - by turning handle
to the right and moving it upward
3. Let the faucet run on cold for 15 to 30 seconds.
4. Open faucet handle - hot side second - by turning han-
dle to the left and moving it upward.
5. Let the faucet run on cold for 15 to 30 seconds.
6. Turn faucet off.
7. Test for leaks under the cabinet.
16 mm [5/8”] key