Franke Consumer Products FFP S700 - Manual (Page 9)

9
ENGLISH
Replacing the cartridge
Before starting, shut off the water supply to the faucet and move the
faucet handle to the off position. Use a 2.5mm [1/8”] Allen key to
loosen the set screw (A) which is accessible from the back of the han-
dle. Lift the handle (B) from the cartridge (F). Find the small notch at
the base of the chrome ring cap and carefully pry up against this to re-
move the cap (C). Remove the brass retaining ring (E) using a 21 mm
[1-1/8”] wrench. Lift out the cartridge (F). Ensure that the grommets
(O-rings) are in good condition and properly seated and remove all
mineral deposits. Install the new cartridge so that the central pivots fit
into the corresponding seats.
A
B
C
D
E
F
2,5 mm [1/8”] Allen key
28 mm [1-1/8”] key