FUJITSU MHW2060AC - Manual (Page 210)

Interface
5.4.3 Commands without data transfer
Execution of the following commands does not involve data transfer between the
host and the device.
• RECABLIBRATE
• READY VERIFY SECTOR(S) (EXT)
• SEEK
• EXECUTE DEVICE DIAGNOSTIC
• INITIALIZE DEVICE PARAMETERS
• STANDBY IMMEDIATE
• IDLE (UNLOAD) IMMEDIATE
• STANDBY
• IDLE
• CHECK POWER MODE
• SLEEP
• SMART ENABLE/DISABLE AUTOSAVE
• SMART EXECUTE OFFLINE IMMEDIATE
• SMART ENABLE OPERATION
• SMART DISABLE OPERATION
• SMART RETURN STATUS
• DEVICE CONFIGURATION RESTORE
• DEVICE CONFIGURAION FREEZE LOCK
• SET MULTIPLE MODE
• FLUSH CACHE (EXT)
• SET FEATURES
• SECURITY ERASE PREPARE
• SECURITY FREEZE LOCK
• READ NATIVE MAX ADDRESS (EXT)
• SET MAX ADDRESS (EXT)
Figure 5.6 shows the protocol for the command execution without data transfer.
5-134 C141-E258