FUJITSU MHW2060AC - Manual (Page 53)

3.4 Jumper Settings
3.4.2 Factory default setting
Figure 3.11 shows the default setting position at the factory.
Open
Figure 3.11 Factory default setting
3.4.3 Master drive-slave drive setting
Master drive (disk drive #0) or slave drive (disk drive #1) is selected.
(b) Slave drive (a) Master drive
Open
Open
Short Open
A 1 C
B D 2 B D 2
A C 1
Figure 3.12 Jumper setting of master or slave drive
Note:
Pins A and C should be open.
C141-E258 3-11