Furman Sound PM-PRO-E - Manual (Page 10)

10 PM-PRO POWER CONDITIONER/MONITOR
Limited Warranty
Important Note: To be sure of obtaining full protection under the terms of the
Three Year Limited Warranty in case your ownership documents are lost,
please fill out and return the Warranty Registration Card immediately.
Please verify that the serial number shown on the Warranty Card matches
the serial number on your unit.
The Furman PM-PRO is warranted against failures due to defective parts or
faulty workmanship for a period of three years after delivery to the original owner.
During this period, Furman will make any necessary repairs without charge for
parts or labor. Shipping charges to the factory or repair station must be prepaid by
the owner; return shipping charges (via UPS Ground) will be paid by Furman.
This warranty applies only to the original owner and is not transferable. Also, it
does not apply to repairs done other than by the Furman factory or Authorized
Repair Stations.
This warranty shall be cancellable by Furman at its sole discretion if the
PM-PRO unit has been subjected to physical abuse, has been operated without a
proper safety ground, or has been modified in any way without written authorization
from Furman. Furman's liability under this warranty is limited to repair or replace-
ment of the defective unit.
Furman will not be responsible for incidental or consequential damages result-
ing from the use or misuse of its products. Some states do not allow the exclusion
of incidental or consequential damages, so the above limitations may not apply to
you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Warranty claims should be accompanied by a copy of the original purchase
invoice showing the purchase date (if a Warranty Registration Card was mailed in
at the time of purchase, this is not necessary). Before returning any equipment for
repair, please read the important information on service below.
Service
Before returning any equipment for repair, please be sure that it is adequately
packed and cushioned against damage in shipment, and that it is insured. We sug-
gest that you save the original packaging and use it to ship the product for servic-
ing. Also, please enclose a note giving your name, address, phone number and a
description of the problem.
NOTE: All equipment being returned for repair must have a Return Authoriza-
tion (RA) Number. To get an RA Number, please call the Furman Service Depart-
ment: (707) 763-1010, ext. 40. Please display your RA Number prominently on the
front of all packages.