Nav data setting – Furuno CI-80 User Manual
Page 32
Advertising
![background image](/manuals/106209/32/background.png)
28
MODE
CALB
SELF TEST
OFF
SYS
OFF
ON
T/D
NAV
SPD
L/L
ECHO PNL
DEMONSTRATION
WATER SPEED
NAV DATA
*1: Shown when tide
processor is active.
*1
*1
Figure 31 MODE menu
Nav Data Setting
1. Press the DISP MODE key to display the echo display.
2.
While pressing and holding down the TRIP key press the
MENU key.
3.
Press
◄ /
►
to select MODE.
4.
Press
or
to select NAV DATA.
5.
Press
or
to select L/L or SPD.
“L/L”: Calculates speed internally from position data
change.
“SPD”: Takes speed data from external navigator as they
are. (Select “SPD” if connected with GPS.)
Advertising