First Alert FA1220CV - Manual (Page 36)

– 36 –
FA1220CV EVENT LOGGING PROCEDURES (continued)
4. Use the [3] & [1] keys (for next and previous
categories respectively) to display the categories of
events.
Press [8] to select a category and display the first
event. Press [8] again for each subsequent event.
Shows burglary alarm occurred in zone 3 (C03) of
partition 1 (P1), at 12:02AM on January 1.
P1 01/01 12:02AM Typical Event
BURGLARY C03 L og Display
After the last event has been displayed, the END OF
EVENT LOG message appears for a few seconds, then
the system automatically displays the RECENT/
COMPLETE mode select screen again (see step 2).
5. To EXIT the Event Log:
Press [ ✱ ] at any time.
ALARM EVENT LOG Typical Category
TYPE CCC UUU Select Screen
Any or all of the following categories may be active.
Check with your installer.
ALARM EVENT LOG
Displays time and date for zones that have either caused
an alarm or have been restored in the selected partition.
CHECK EVENT LOG
Displays time and date for zones that have caused a
trouble or supervisory condition in the selected partition.
BYPASS EVENT LOG
Displays time and date for zones that have been bypassed
in the partition.
OPEN EVENT LOG
Displays time, date and user number for each arming and
disarming of the system for the partition selected.
SYSTEM EVENT LOG
Displays time and date for system problems, such as AC
Loss, low battery, etc., regardless of partition.
ALL EVENT LOG
Displays all categories of events in chronological order.
See your Installer for additional
information concerning the event log.
Technical Manuals Online! - http://www.tech-man.com