Trouble conditions – First Alert FA1220CV User Manual
Page 40
– 40 –
TROUBLE CONDITIONS
Power Failure
If the POWER indicator is off, operating power for the system has stopped and is inoperative.
CALL FOR SERVICE IMMEDIATELY. If the POWER indicator is on, but the message " AC
LOSS" is displayed, the keypad is operating on battery power only. If only some lights are out
on the premises, check circuit breakers and fuses and reset or replace as necessary. CALL
FOR SERVICE IMMEDIATELY if AC power cannot be restored.
Non-Alpha Keypad
Displays
The following displays will appear on non-alpha keypads when the associated trouble condition
(previously described) is present.
97 = CALL SERVICE
98 = CALL SERVICE
FC = COMM FAILURE
BAT = SYSTEM LO BAT (if no zone number) or LO BAT (if zone number shows)
CC = MODEM COMM
NO AC = AC LOSS
SERVICING INFORMATION
Your local First Alert Professional dealer is the person best qualified to service your alarm
system. Arranging some kind of regular service program with him is advisable.
Your local First Alert Professional dealer is:
Name:
Address:
Phone:
Technical Manuals Online! - http://www.tech-man.com