Fisher & Paykel CG905 - Manual (Page 28)

26
Care and cleaning
Brass wok burner (CG905DWAC models only)
Each part of the brass wok burner has locating pins to help you to assemble it correctly after
cleaning. See Fig.23 below.
Note: the brass parts of your wok burner will change colour with use. However, this will not
affect performance and you can clean the brass parts with a brass cleaner.
Rotate vent ring to align locating
pin with hole in burner base.
Inner cap
Outer cap (small holes)
Trim ring
Vent ring with locating pins
(large holes)
Align and insert pin
Side view
Fig.23 Correct positioning of brass wok burner parts (CG905DWAC models only)