Fisher & Paykel CG905 - Manual (Page 30)

28
Troubleshooting
Problem Possible solutions
There is a power failure. Models with auto-reignition (CG905DWAC)
The gas supply will be cut off, even if a burner is in use.
The cooktop cannot be used if there is a power failure. Wait
until power is restored.
If a control dial is still turned on when the power is
restored, the corresponding ‘Burner On’ indicator will flash
rapidly. Turn the burner off and light it again to resume
cooking.
All other models (CG905DWFC, CG604DWFC, CG604CWC,
CG604LC)
You can still use your cooktop.
Light the burners by holding a match close to the side of
the burner and turning the control dial to HIGH. Wait until
the flame is burning evenly before adjusting.
CG905DWAC models
only: All my ‘Burner On’
indicators are flashing. Turn all the control dials to O (OFF) and restart.