27 parallel index lines, 28 origin mark – Furuno FR-1710 User Manual

Page 39

Advertising
background image

1-25

1.27 Parallel Index Lines

Parallel index lines are useful for keeping a
constant distance between own ship and a
coastline or a partner ship when navigating.
The orientation of the index lines is controlled
with the EBL rotary control and the intervals
between the lines adjusted with the VRM ro-
tary control (provided that No.2 VRM is ac-
tive).

Index lines

Figure 1-36 Index lines

Displaying/erasing the index lines

Press the [INDEX LINE] key to display/erase
the index lines. Each press of the key turns
the parallel index lines on (enabling adjust-
ment by VRM, EBL), fixes them on the dis-
play or turns them off.

Selecting number of index lines to
display

Maximum number of the index lines can be
set for 2 or 6 on the MARK/LINE in the
OTHER menu.

1.28 Origin Mark

You can mark any reference points, promi-
nent target or a point of particular interest us-
ing the origin mark feature. This mark is
geographically fixed, namely, ground stabi-
lized. Twenty such origin marks can be en-
tered. This function is not available when the
RP-17 board is installed.

To use the origin mark:

1. Place the cursor (+) at a point where you

want to place a reference mark by oper-
ating the trackball.

2. Press the [MARK] key. The origin mark

appears at the cursor position, of which
range and bearing are indicated at the
upper-right section of the screen.

Origin mark reference

The origin mark can be set relative to own
ship (relative), or referenced to land (sea or
ground stabilized).

1. Press the [MENU] key.

2. Press the [8] key twice to select MARK.

MARK

1. ERASE

2. MODE

REL TRUE

Figure 1-37 MARK menu

3. Press the [2] to select the REL or TRUE

from the MODE field as appropriate.

4. Press the [ENTER/SELECT] key.

5. Press the [MENU] key.

Erasing origin marks

Erasing individual origin marks

Select the origin mark with the cursor and
then press the [CANCEL/CLEAR] key.

Erasing all origin marks

1. Press the [MENU] key.

2. Press the [8] key twice to select MARK.

3. Press the [1] key twice.

4. Press the [MENU] key.

Advertising