Friedrich CP08 - Manual (Page 8)

6
How to operate your Friedrich ZStar ®
Function Controls
When the air conditioner has finished cooling the room and is turned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.
CAUTION
HIGH
COOL HIGH
COOL MED
FAN
MED
FAN
LOW
FAN
LOW
FAN
LOW COOL LOW COOL
MED
COOL MED
COOL
1 1 9 9
8 8 2 2
7 7 3 3
6 6 4 4
5 5
Off - Turns air conditioner off.
Med Fan - Med speed fan operation without cooling.
Low Fan - Low speed fan operation without cooling.
High Cool - Cooling with high speed fan operation.
Med Cool - Cooling with med speed fan operation.
Low Cool - Cooling with low speed fan operation.
This automatically controls the temperature of the indoor air.
Turn the knob so that arrow points to the higher number for greater cooling.
Point the arrow to the lower number for more moderate cooling.
(i.e. the higher the number, the greater the cooling)
• FOR NORMAL COOLING
1. Turn the operation switch to the
High Cool
or the
Low Cool
setting.
2. Set the Thermostat control to the desired temperature mark
5
(the mid-point is a good starting position).
If the room temperature is not satisfactory after a reasonable time, adjust the control to a cooler or warmer
setting, as appropriate.
• FOR MAXIMUM COOLING
1. Turn the Operation Knob to the High Cool setting.
2. Set the Thermostat control to the largest (
9
) temperature mark.
• FOR QUIETER OPERATION
1. Turn the Operation Knob to the Low Cool setting.
2. Set the Thermostat control as needed.
8