Motion detection sensitivity, Format memory card – First Alert Wireless 4GB Security System DWS-472 User Manual
Page 15
Page 15
Use
to select MOTION DETECTION SENSITIVITY section. Use
to highlight camera for setup.
Use
to adjust sensitivity level: OFF / LV1 / LV2 / LV3 (LV3 is most sensitive). Press ESC to save and exit.
Use
to select FORMAT STORAGE, press
MENU to enter. Press
MENU again to confirm
and begin formatting memory card. Press ESC to
exit. NOTE: If a new memory card is used then it
must be formatted first here before use.
Recorder Setup-Motion Detection Sensitivity
Recorder Setup-Format Memory Card
Formatting the Memory Card
When you install a new memory card, you must
format it before it can be used. Clicking the FOR-
MAT STORAGE button will begin the formatting
process. WARNING! Formatting an existing SD
Card erases all data. This step cannot be undone.