Multi channels idle display setup, Multi-channel idle display – First Alert Wireless 4GB Security System DWS-472 User Manual

Page 21

Advertising
background image

Page 21

Multi Channels Idle Display Setup Menu

Select SYSTEM SETUP, press

MENU to enter. Use

to select MULTI CHANNELS IDLE DISPLAY.

Use

to highlight DISPLAY QUAD DURING IDLE / AT 5 SEC INTERVALS / AT 10 SEC

INTERVALS / AT 15 SEC INTERVALS. Press MENU to confirm selection. Press ESC to save and exit.
NOTE: (1) Camera ON/OFF setting in CAMERA SETUP section will affect which camera(s) can be
displayed during IDLE DISPLAY. (2) Audio (single channel at anytime) will be available during QUAD mode
(by default on channel 1 or the next available channel with camera paired to system), single FULL screen
mode (auto switch to channel viewing at the time), or channel triggered by motion. (3) Audio channel will
stay connected until channel switched. (4) If set to 5/10/15 sec. interval then select SCAN ACTIVATED
CAMERAS to achieve this display mode.

Idle Display - 15 Seconds

Idle Display - QUAD

Idle Display - 5 Seconds

Idle Display - 10 Seconds

Advertising
This manual is related to the following products: