FUJITSU CG-301 - Manual (Page 24)

(8) INITIALIZE
Present settings are reset to the factory default settings.
Fig. 8 INITIALIZE MENU
Fig.14 INITIALIZE menu
Operation procedure
1. Move the cursor to INITIALIZE and press the SW. INITIALIZE menu is displayed.
2. Move the cursor to OK and press the SW. All parameters and adjustments are reset to the factory
default settings.
3. The screen automatically reverts to MAIN MENU when the initialization is finished.
Note) Even if this function is executed, the following item is not initialized.
ADDRESS and COM SPEED on CAMERA SETUP menu
Adjustment value of PHASE on SYNC SELECT menu
Blemish Compensation
The fig.14 shows parameters after executing INITILIZE. (factory default settings)
Fig.15 Setting parameters of INITIALIZE
En-23
INITIALIZE
ALL SETTINGS ARE
IINITIALIZED
OK CANCEL
EXPOSURE SET.
AE MODE
LEVEL
FLICKERLESS
AGC
SENS UP
DAY&NIGHT
DETECT TIME
FILTER LIMIT
RETURN END
FUNCTION SET.
SYNC SELECT
WHITE BALANCE
CROMA
*GAMMA
*E-ZOOM
MASKING
TITLE
RETURN END
→
→ AUTO
→
→ NORMAL
→
→
→
→ WD
→ 0
→ OFF
→ ON
→ 4
→ AUTO
→ 5sec
→ 10min
CAMERA SETUP
ADDRESS
COM SPEED
LED
SWITCH
RETURN END
→ 1
→ 4800
→ ON
→ ON