FUJITSU CD1000 - Manual (Page 16)

16
Operation
Displaying CD text
If the CD came with a logo shown below, it is
recorded with a disc title and track titles. These
information will be displayed during playback.
Each time the button is pressed, the
following will be displayed in order.
Track No & elapsed time
➔ Track No &
clock ➔ Disc name ➔ Track name ➔
Track No & elapsed time www
CD TEXT recorded with characters
other than alphanumeric and symbols
cannot be displayed.
Displaying title
Each time the button is pressed, the
following will be displayed in order.
When “TAG DISP” is set to “TAG ON”
(see page 23)
:
Track No & elapsed time ➔ Track No &
clock ➔ album/airtist tag(folder name*)
➔ title tag(file name*) ➔ Track No &
elapsed time …
* If an MP3/WMA file does not have
ID3 tags, folder name and file name
appear. In this case, the TAG indicator
will not light up.
When “TAG DISP” is set to “TAG OFF” :
Track No & elapsed time ➔ Track No &
clock ➔ Folder name ➔ File name ➔
Track No & elapsed time …
The display area shows a maximum
of 8 characters and then scrolls to
display the remaining characters.
After the folder name is displayed,
the file name will be displayed by
scrolling. After the file name is
scrolled, the display will be fixed.
ATTENTION
This receiver can handle only one-byte
characters. No other characters can correctly
be displayed.
Ejecting the disc
The disc will be ejected.
1 Press the [DISP] button.
1 Press the [DISP] button.
1 Press the [ ] button.