FUJITSU CD1000 - Manual (Page 25)

If you have a question:
25
X
If you have a question:
Displayed information (for troubleshooting)
The information listed in the chart below is displayed to show the status of the CD, Refer to the chart for
the appropriate action.
Symptoms Causes Remedies
Ge
n
era
l Sound cannot be heard
from the speakers.
The volume level is set to the minimum
level.
Adjust it to listening level.
Connections are incorrect.
Check wiring and
connections.
This receiver does not
work at all. The built-in microcomputer may have
functioned incorrectly due to noise, etc.
Reset the receiver .
FM
/A
M
ASM automatic presetting
does not work.
Signals are too weak. Store stations manually.
Static noise while listening
to the radio.
The antenna is not connected firmly. Connect the antenna firmly.
Di
sc p
layb
ack
Disc is automatically
ejected.
Disc is inserted upside down. Insert the disc correctly.
·CD-R/CD-RW cannot be
played back.
·Tracks on the D-R/CD-
RW cannot be skipped.
CD-R/CD-RW is not finalized.
·Insert a finalized CD-R/
CD-RW.
·Finalize the CD-R/CD-RW
with the component which
you need for recording.
Disc can be neither played
back nor ejected.
Disc is locked.
Unlock the disc (see page
16).
The CD player may have functioned
incorrectly. Eject the disc forcibly (see
page 16).
Disc sound is sometimes
interrupted.
You are driving on rough roads.
Stop playback while driving
on rough roads.
Disc is scratched. Change the disc.
Connections are incorrect.
Check wiring and
connections.
"NO DISC"appears on the
display.
Disc is inserted incorrectly. Insert the disc correctly.
IX