Fisher-Price MX3 73535 - Manual (Page 11)

• Turn the lock nut clockwise until it stops against the
brake adjustment knob.
• Turn the brake adjustment knob counter-clockwise until
the lock nut stops against the brake base.
4
Lock Nut
Brake Adjustment
Knob
Brake
Adjustment
Knob
Brake Base
OK
✔
No Gap
Adjust Brake
Gap
Adjusting the Brake
• From the front of the handlebar, examine the brake
handle and the brake base.
- If there is NO gap between the brake base and the
brake handle, your brake is properly adjusted. Please
proceed to the label decoration section on page 13.
- If there IS a gap between the brake base and the
brake handle, your brake needs to be adjusted and
tightened. Please go on to step 2 in this section.
11
1
• Turn the lock nut clockwise a few times to loosen it.
• Turn the brake adjustment knob clockwise a few times to
tighten the brake and close the gap between the brake
base and brake handle.
• When the gap is closed, hold the brake adjustment knob
in position and turn the lock nut counter-clockwise tight
against the brake base to secure the adjustment.
F
IMPORTANT! Check to be sure the brake is adjusted properly and is tight. Please follow these instructions carefully
before you use this mini-bike.
OK
✔
No Gap
2
Lock Nut
Brake
Adjustment
Knob
• Now, from the front of the handlebar, examine the brake
handle again.
- If there is NO gap between the brake base and the
brake handle your brake is properly adjusted. Please
proceed to the label decoration section on page 13.
- If you cannot eliminate the gap or if the brake
adjustment knob unthreads from the brake base,
proceed to step 4.
Adjust Brake
Gap
3
Turn
Lock Nut
Hold Brake
Adjustment
Knob
Lock Nut