FUNAI F20LCTE-A - Manual (Page 6)

OPERATING CONTROLS AND FUNCTIONS
- 6 - EN
1
2
3
4
5
6
7
MENU VOL. CH. SELECT
POWER
POWER
1 2 3 4 5 6 7
- FRONT PANEL - - REAR PANEL -
1. MENU button- Press to display the set up menu
on the TV screen.
2. VOL.
▼/▲ buttons- Press to ajust the volume
level.
Press VOL
▲ to determine the setting mode at
the set up menu.
Press to select or adjust a menu item.
3. CH.
▼/▲ buttons- Press to select desired
channels.
Press to select or ajust a menu item.
4. SELECT button- Press to select TV or video
input mode (VIDEO1 or VIDEO2).
5. POWER button- Press to turn the TV ON and
OFF.
6. Infrared Remote Sensor- Receives the
signals from the remote control.
7. POWER Light- Appears when the TV is ON.
1. AUDIO L/R input jacks- VIDEO2: Connect to
the left/right audio output jacks of a DVD player
or set top box.
Note: The AUDIO L jack is for mono input.
The sound is heard from both speakers. Use this
jack for connecting monaural audio equipment.
2. COMPONENT video input jacks- Connect
to the component video out jacks of a DVD or
set top box.
3. AUDIO L/R input jacks- VIDEO1: Connect to
the left/right audio output jacks of a video
camera, VCR or video game.
4. VIDEO input jack- Connect to the video output
jack of a video camera, VCR or video game.
5. S-VIDEO input jack- Connect to the S-VIDEO
output jack of a video camera or VCR using the
S-VIDEO cable (not supplied).
Note: The S-VIDEO jack is given priority over
the VIDEO jack.
6. ANT(enna). in jack- Connect to an antenna,
cable system or satellite system.
7. HEADPHONE jack- Connect headphone (not
supplied) for personal listening.
Note: Do not connect earphones that have an L-
shaped plug. The plug may interfere with the
jack.