FUNAI F20LCTE-A - Manual (Page 9)

The tuner scans and memorizes all active channels
in your area.
●
The TV distinguishes between standard TV
channels and cable (CATV) channels.
●
When AUTO PRESET CH action is completed,
the lowest memorized channel reappears on the
screen. When there is no signal to ANT in jack,
“NO TV SIGNAL” will appear. In this case,
please check the antenna connections, then try the
auto preset again.
●
When you press CH
▼or ▲ after selecting
“AUTO PRESET CH”, the tuner will stop at the
memorized channels only.
●
The TV may memorize TV channels as CATV
channels if the reception conditions are poor. If
this happens, try AUTO PRESET CH action again
when reception conditions are better.
ADD/DELETE FUNCTION
Press MENU so that the set up menu appears on
the TV screen.
Press CH
▼or ▲ to point to “CHANNEL SET
UP”. Then press VOL
▲.
Press VOL
▲ to select “ADD/DELETE CH”.
Use CH
▼or ▲ to select the channel you wish to
put into memory or to erase from memory.
● Press VOL
▲ to highlight the channel number
in LIGHT BLUE if you wish to add the
channel into memory.
● Press VOL
▲ to highlight the channel number
in LIGHT RED if you wish to erase the
channel from memory.
Press MENU to exit. 5
4
3
2
1
To preset a channel or to change a preset channel,
follow the procedure below.
Press POWER to turn on the TV.
Press MENU so that the set up menu appears on
the TV screen.
Press the CH
▼or ▲ to point to “CHANNEL
SET UP”. Then press VOL
▲.
Press CH
▼or ▲ to point to “AUTO PRESET
CH”. Then press VOL
▲.
4
3
2
1
If you want to change the language of the on-screen
menu, follow the procedure below.
Connect antenna or cable first, then connect the
power cord to a standard AC outlet.
Note: If some digits appear in the corner of the
screen, press POWER without unplugging the
power cord.
Press POWER to turn on the TV.
Press MENU so that the set up menu appears on
the TV screen.
Press CH
▼or ▲ to point to “LANGUAGE”.
Select [ENGLISH], [ESPAÑOL] or
[FRANÇAIS] by using the VOL
▼or ▲.
Press MENU to exit. 6
5
4
3
2
1
- 9 - EN
SET UP FOR USE
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- CHANNEL SET UP -
ADD/DELETE CH (TV)
AUTO PRESET CH
LANGUAGE SELECTION
CHANNEL PRESETTING
- CHANNEL SET UP -
ADD/DELETE CH (TV)
AUTO PRESET CH
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
ENGLISH