Before you call for service – GE WNCD2050 User Manual

Page 10

Advertising
background image

10

Operating Instructions

Safety Instructions

Customer Service

Troubleshooting T

ips

PERFORMANCE (cont.)

Possible Causes

What To Do

Snags, holes, tears, rips

Pins, snaps, hooks, sharp

•

Fasten snaps, hooks, buttons, and zippers.

or excessive wear

buttons, belt buckles,

•

Remove loose items like pins, objects in pockets

zippers, and sharp objects

and sharp buttons.

left in pockets

•

Turn knits (which snag easily) inside out.

Undiluted chlorine bleach

•

Check bleach package instructions for proper amount.

•

Never add undiluted bleach to wash or allow clothes

to come in contact with undiluted bleach.

Chemicals like hair bleach

•

Rinse items that may have chemicals on them before

or dye, permanent wave

washing.

solution

Wrinkling

Improper sorting

•

Avoid mixing heavy items (like work clothes) with

light items (like blouses).

•

Try a fabric softener.

Overloading or

•

Load your washer so clothes have enough room

incorrect water level

to move freely.

Incorrect wash and

•

Match Cycle selection to the type of fabric you are

dry cycles

washing (especially for easy care loads).

Repeated washing in

•

Wash in warm or cold water.

water that is too hot

OPERATION

Possible Causes

What To Do

Washer pauses in cycle

The DELICATES cycle was chosen

•

This is normal. The DELICATES cycle has a short soak

period.

Washer won’t operate

Washer is unplugged

•

Make sure cord is plugged securely into a working outlet.

Water supply is turned off

•

Turn both hot and cold faucets fully on.

Controls are not set properly

•

Check controls.

Lid is open

•

Close lid.

Circuit breaker/fuse is

•

Check house circuit breakers/fuses. Replace fuses or

tripped/blown

reset breaker. Washer should have separate outlet.

Electronics need to be reset

•

Unplug washer, wait 2 minutes, plug back in,

and press START.

START was not pressed

•

Press START.

Extremely low water pressure

•

Press START again.

Before you call for service…

Troubleshooting Tips

Advertising