GENNUM Z-280 - Manual (Page 10)

Positioning the Headset
It is recommended you stand in front of a mirror when trying to fit the headset for
the first time. You can fit the headset on either the left ear or right ear by first
rotating the flexible arm over the top of the headset onto the left side or right side
respectively. Grasp the headset between your thumb and index and middle fingers
as shown. Position the body of the headset over the top of the ear and insert the
ear tip into the ear. Rotate the headset until it hooks into position over the top of
your ear. If the ear tip is not snugly positioned in your ear, remove the headset and
adjust the flexible arm by pressing it in the direction that will allow a more snug fit
on the ear. This is just one suggestion for putting it on and you may find a more
convenient way of doing it. We encourage you to try this a few times,in front of the
mirror,until you find the most comfortable position for yourself.
© 2005 Gennum Corporation All rights reserved
Page 10