GENNUM Z-280 - Manual (Page 14)

To turn OFF the headset, the SIDE button until you hear 4
. Release the SIDE button and you will hear a quick series of going
from . If you are not wearing the headset, the
SIDE button for 4 flashes of the Blue Indicator Light.
With the headset oriented upright,
You will hear a beep when you have reached the top end or bottom end of the
volume range.
When on a call,the volume control on your headset is synchronized
to the volume on your phone. As you change the volume you will see the
volume bars on your phone change accordingly. However, if you change the
volume control on your phone, it will have no effect on the headset volume
level
The volume control in each mode (Hi-Fi Music, L-E-A-P 1
press and hold
beeps tones
high to low pitch press and hold
DigitalVolume Control
Ÿ
Ÿ
Rotate the volume control knob upwards to increase the volume
Rotate the volume control knob downwards to reduce the volume
,
NOTE:
NOTE: TM
© 2005 Gennum Corporation All rights reserved
Page 14