GE RM94906 - Manual (Page 10)

Retrieving Codes
If you need to find the three-digit code for your
TV, VCR, DVD Player, DBS Receiver, or Cable
Box after your device is set-up using Code
Search, use this procedure.
1. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
2. Press and release the
device button for the
d e v i c e’s code you are
retrieving . The
I N D I C ATOR LIGHT
will blink once then
remain lit. For
DVD•AUX, press
DVD•AUX then
the device button for
the code you are
retrieving.
3. Press and release
SETUP. The
INDICATOR LIGHT
will turn off.
4. Starting with 0 on the
keypad, press the
number buttons in
order (0-9) until the
INDICATOR LIGHT
blinks.
5. The number which
causes the INDICATOR
LIGHT to blink is the
first digit of your code.
6. Repeat step 4 until you
have retrieved all three
numbers in the code.
BLINK
INDICATOR
LIGHT
SETUP
DVD•AUX CBL•SAT
SETUP OFF
. . . . .
9
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 10