Programming with code search – GE RM94906 User Manual
Page 9
8
Programming With Code Search
If your TV, VCR, DVD Player, cable box or satel-
lite receiver does not respond after you have
tried all the codes for your brand, or if your
brand is not listed, try searching for your code
by following the steps below.
1.
Turn on the device
you wish to program.
2.
Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
3.
Press and release the
device button for the
device you are
programming. The
I N D I C ATOR LIGHT
will blink once then
remain lit.
For Auxillary device,
press DVD•AUX then
the device button you
are assigning to AUX.
4.
Press and release
ON•OFF until your
device turns off.
Important: You may
have to press ON•OFF
up to 200 times.
5.
When your device
turns off, press the
ENTER button, the
INDICATOR LIGHT
will go off.
BLINK
INDICATOR
LIGHT
SETUP
DVD•AUX
CBL•SAT
OFF
94906 Revised Size 1/21/02 2/25/02 4:20 PM Page 9