GIGABYTE GS-R12T4H2-RH - Manual (Page 21)

2 1
GS-R12T4H2-RH Rack Mount Server
Installing the Hard Disk Drive
Step 1 Press the release button.
Step 2 Pull the locking lever to remove the HDD tray.
Step 3 Slide hard disk into blank.
Step 4 Secure the hard drive to the tray with four (4) screws as shown. Do not over tighten the
screws. Slide the blank into the bay until it locks into place.
Step 5 Engage the HDD Security Lock. For detail instruction, please see the following section.
Step 6 Connect cable and power.
1
2
3
4
4