GIGABYTE GS-R12T4H2-RH - Manual (Page 40)

4 0
Jumper Setting
Jumper Setting
2
1
3
4
5
6
7
1 ) BIOS_RVCR1 (BIOS Revocery jumper)
1-2 close: Normal operation. (Default setting)
2-3 close: Enable BIOS Recovery function.
2 ) CLR_CMOS1 (Clear CMOS jumper)
You may clear the CMOS data to its default values by this jumper.
Default value doesn’t include the “Shunter” to prevent from improper use this jumper. To
clear CMOS, temporarily short 2-3 pin.
1-2 close: Normal operation (Default setting)
2-3 close: Clear CMOS
1
1
1
1