Gefen Extender DVI 1600HD User Manual
Page 5
2
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI 1600HD EXTENDER
•
The DVI 1600HD Extender uses 4 strands of LC terminated fi ber optic cable.
•
Single-mode and multi-mode fi ber optic cable types are both supported.
•
DVI and HDMI/HDCP modes are available and are selectable via a switch
located on the front panel of the DVI-1600HD sender unit.
•
Analog stereo RCA , digital S/PDIF, and digital TOSLINK inputs are all
available for input but only one is selectable for transmission to the receiver.
The selected audio input will be replicated out of all three audio outputs on
the DVI-1600HD Receiver.
•
HDMI mode supports HDCP/DDC with resolutions up to 1080p Full HD. Both
single and multi-mode cables are supported. Extension distances of up to
660 feet (200 meters) are supported in HDMI mode.
•
DVI mode does not support HDCP or DDC and supports resolutions up to
1920 x 1200. Multi-mode fi ber can support distances of up to 1640 feet.
Single-mode fi ber can support distances of up to 6,600 feet (2 km).
•
The DVI-1600HD is HDMI 1.2 compliant.
OPERATION NOTES