GE GRD33G3A - Manual (Page 49)

REFERENCE
47
Home View
These parts are inside of or attached to your house.
DSS ® Satellite Dish Picks up the satellite’s coded program
information and relays it to your DSS ® receiver. (Your satellite dish
may be installed in different locations on or around your house. The
satellite dish must, however, be pointed in a southern direction
toward the satellite.)
DSS ® Receiver Receives the TV program information and sends it to
your TV or VCR.
Telephone Jack Connects to the phone jack on the back of the DSS ®
receiver. The DSS ® receiver uses a toll-free number once a month to
update your access card. This update only takes a few seconds and
ensures that you will have continuous service. The system
automatically hangs up if you pick up the phone when the DSS ®
receiver is calling out.
Television If your television is remote controllable, you can program
the DSS
® Universal TV Remote to change channels and volume.
DSS ® TV Universal Remote (included with your DSS ® system)
Controls the DSS ® system as well as most remote controllable TVs,
VCRs, and other devices. Point the remote at the device you want to
control.
Access Card (installed in DSS ® receiver) Must be inserted for you to
use the DSS ® system! Provides system security and authorization of
DSS ® services. Do not remove the card except when issued a new
card as a replacement for the original.
Satellite Dish DSS Receiver Telephone Jack
Remote Control
Access Card
and Security Clip