GE 225D1804P001 - Manual (Page 23)

TOP DRAWER
Installation Instructions
REMOVING THE FREEZER DRAWERS
REMOVE THE BASKET
Open the freezer drawer until it stops.
Cut the 2 wire ties off of the basket with wire
cutters.
Lift the front end of the basket so that the front
two alignment tabs come out of the slide
bracket first.
Then rotate the front edge of the drawer up
while lifting the remaining two rear alignment
tabs out of the slide bracket. Pull the basket up
and out of the drawer.
1
A
C
D
The freezer drawers can be removed, if needed, to fit
through tight areas.
Read these instructions completely and carefully.
REMOVE THE DRAWER FRONT FROM
THE SLIDES
Remove the 8 hex head screws from the door
and remove the door.
Set the drawer front on a non-scratching
surface.
Push the rail assemblies back into the cabinet.
2
A
A
B
C
B
23