Garmin STYLUS PRO PRO WT7900 - Manual (Page 4)

3
5
Roll the paper forward so it rests on top of the
printer.
6
Pull up the tension levers, then remove the adapters
from the paper roll.
7
Place the roll in its original package.
Removing Epson Media
9
Grasp the left roll paper holder and slide it to the
right as far as it will go. Make sure the roll paper is
pushed all the way to the right.
10
Pull up the lock lever to lock the paper in place.
11
Press the paper source button until or
appears on the display. Choose to cut the
paper automatically after each page is printed,
or
to decide for yourself when to cut the paper.
12
If the light is not on, press the button to
load paper.
13
Insert the paper all the way into the slot.
If the paper doesn’t come out, lower the suction by
pressing the
button. Return the suction to normal
after the paper is loaded.
14
Close the roll paper cover.
15
Press the button to secure the paper. Wait for the
paper to move into position.
16
Select the paper type setting (such as ClearProof
Film) to match the type of paper you’ve loaded.
1
Open the roll paper cover.
2
Press the button to release the paper. The paper
rewinds automatically.
3
If you don’t plan to reload paper immediately, press
the button again to exit paper loading mode.
4
Push down the lock lever firmly to release it. Then
grasp the roll paper holder and slide it all the way to
the left to release the roll.
Loading Epson Media (continued)