Gemini iKEYplus - Manual (Page 16)

320 320 RECORD RECORD
STEP 11: PRESS RECORD TO STOP!
When you are ready to end the recording, press the REC but-
ton found on the left front of the unit. You MUST end
recording this way, or the file will not be saved.
Once the REC button is pressed, all of the LED lights will
turn on briefly to show that the unit has recognized your
command. After the LED lights extinguish (usually about 0
to 2 seconds), the recording will cease, and the RECORD
LED will extinguish. If you are recording to an iPod, the LED
lights may light for up to 30 seconds while the file is
processed by the iPod.
Once the recording has ended, the LED lights will once
again function as a VU meter, showing you the input volume.
You may create another recording by pressing REC again (ie.
repeat step 10).
320 320 RECORD RECORD
Figure D - All LEDs illuminate briefly to show that the unit has
recognized your command.
320 RECORD
320 320 RECORD RECORD
320 RECORD
16
Visual Quickstart Guide
(continued)