GCC Printers 12 User Manual
Page 10
RAM SIMM
ROM card
Notch
10
8.
Install the RAM SIMM.
a.
Position the SIMM so that the notch is
toward the top.
b.
Place the SIMM in the socket so that the
top of the SIMM is angled toward your left.
Gently press the SIMM down into the
socket.
c.
Pivot the SIMM so that it moves upright.
The retaining clips will snap into place. If
the retaining clips will not snap into place,
you have not inserted the SIMM correctly.
9.
Reinsert the ROM card in the same way that
you inserted the SIMM.
Warning: If the RAM SIMM and ROM card
are not correctly inserted completely into
the socket, your printer may display an
error message when you turn it on and it
will not operate.
10. If you are having trouble inserting the SIMM or
ROM card:
•
Make sure that the cards are in the correct
sockets. The ROM card is slightly shorter
than the RAM SIMM.
•
Make sure that the notch in each card is
toward the top.