GCC Printers 12 - Manual (Page 9)

9
6. IMPORTANT: Attach a grounding wrist strap to
the perforated metal chassis, or touch the
chassis regularly to dissipate static
electricity from your body.
7. The ROM and RAM cards are at the right of the
controller board. Remove the ROM card to get
better access to the RAM slots.
a. Place your index fingers under the back
edge of the ROM card.
b. Using your thumbs, slowly push the two
retaining clips outward until the clips clear
the top surface of the ROM card.
c. Pivot the ROM card away from the
retaining clips and remove the ROM card
from the socket.
d. The ROM card has a notch in it; this must
be at the top of the contacts when you
reinstall it.
e. Put the ROM card in a safe place; after
you have installed the RAM you will need
to reinstall it.
AAU I
10BASE -T
PARALLEL
SCSI
LOCAL TALK RS -422
ROM Card
RAM SIMM
RAM SIMM
Remove
RAM
SIMM or
ROM
Card
Notch
Install
RAM
SIMM or
ROM
Card
Notch