GE E1035 - Manual (Page 25)

21 21
To remove the SD/SDHC card, open the battery
compartment and gently push the card to
release it. Pull the card carefully.
7XUQLQJRQDQGRȖ
Press the Power button to turn the camera
RQ7RWXUQRȖWKHFDPHUDSUHVVWKHPower
button again.
W T
Power button
When turned on, the camera will enter the
mode according to the mode dial setting. You
can also turn the mode dial to change the
modes after the camera is turned on.
3. Close the battery compartment.