GE E1035 - Manual (Page 81)

77 77
By using the USB cable, you can transfer the
captured photos and videos to a PC. Follow
the steps below to connect the camera to a
PC.
1. Start a computer to which ArcSoft
software has been installed.
0DNHVXUHERWKWKHFDPHUDDQG3&DUH
turned on.
3. Connect one end of the supplied USB
cable to the USB/AV OUT port on your
camera.
4. Connect the other end of the cable to an
available USB port on your PC.
5. Disconnect the camera once transfer is
completed.
If the USB option is set to [PC]
:
7XUQWKHFDPHUDRȖDQGGLVFRQQHFWWKH86%
cable.
If the USB option is set to [PC (PTP) ] :
Remove the camera from the system as described
EHORZEHIRUHWXUQLQJWKHFDPHUDRȖDQG
disconnecting the USB cable.
Window XP Home Edition/XP Professional
&OLFNWKH>6DIHO\5HPRYH+DUGZDUH@LFRQ 
LQWKHWDVNEDUDQGVHOHFW>6DIHO\UHPRYH86%
Mass Storage Device] from the menu displayed.