Grundig YB550PE - Manual (Page 9)

QUICK GUIDE continued QUICK GUIDE continued
S T O R I N G A F R E Q U E N C Y I N T O M E M O RY
200 frequencies can be stored into 8 pages of memory, each
page holding 25 frequencies. Turn on the radio. First, select a
memory page by pressing the M.Scan/Page button for about
3 seconds. The memory page then flashes in the upper right
corner of the display. Within 5 seconds select the desired
page with the +/ – buttons. Once selected, either
press/release the M.Scan/Page button or wait about 3 sec-
onds, causing the memory page to be entered. Next, tune to
the desired radio station, then press/release the Mem./Edit
button and note that the ‘PRESET’ digits flash in the upper
right corner of the display. Within 5 seconds use the numeric
keypad to enter the memory preset number that you wish to
store the station into (in the factory default setting, there are
25 presets per page). Punch in a number from 1 to 25. Within
5 seconds press the Mem./Edit button.
17 16
YB 550PE OPERATION MANUAL
A C C E S S I N G W H AT I S S T O R E D I N T O
M E M O RY
Once a page number has been selected or changed, even if it
is not seen on the screen, you can access any memory preset
on that page by keying in the memory number with the
numeric keypad. To change pages, use the procedure
described previously. Memory Search enables searching
through the memory presets within a memory page.
Press/release the M.Scan/Page button, then use quick, short
presses on the +/– buttons to search through the memory
presets. Using a longer, 3 second press of +/- engages
Memory Autoscan, allowing about 5 seconds on each memo-
ry before automatically moving on to the next one. To stop
memory preset autoscan, press/release one of
the +/– buttons.