Graco ISPC089BB - Manual (Page 14)

1. Infant restraint comes with four
(two on certain models) identical
canopy support parts.
Thread one canopy support
completely through one sewn
tunnel
➊
.
2. Slide straight end of a second
support into the straight end of
the first support
➋
.
3. On models with four
canopy supports, repeat
steps one and two for the
other canopy tunnel. The
canopy should appear as
shown
➌
.
4. Attach canopy in the areas between the
infant restraint and the handle base
➍
.
To remove canopy, reverse the steps.
3.5 Attaching Canopy (on certain models)
➊
➋
➌
➍
14
OR