Graco ISPC089BB User Manual
Page 44
7.3 Cleaning and Maintenance
!
TO REMOVE AND WASH INFANT RESTRAINT PAD, follow
instructions in “6.1 Positioning
Harness Straps”, p. 29-30.
On 5-point harness models,
push aside the small tab that
holds the anchor buckles in
place
➋
and pull the anchor
buckles out of their indentations.
Push a corner of each anchor
buckle back into its slot
➌
.
Carefully remove the seat pad. Machine wash on
delicate cycle and drip-dry. DO NOT USE BLEACH.
Reverse steps to reinstall seat pad. Check that harness system is not
twisted, and pull on harness system to be sure harness is securely
reinstalled.
44
4.
Repeat step 3 for LATCH with
adjustment belt. After fastening onto
storage bar, pull on adjustment belt to
make sure LATCH is securely fastened.
5.
LATCH storage should look like this
when complete
➊
.
➌
➋
Underside of base
➊