Graco NAUTILUS PD101777B - Manual (Page 25)

25
›
9.0 Using Child Restraint WITH Built-in Harness
š
1. Loosen the harness straps by lifting the
harness adjuster lever ™ at front of seat near
the adjustment strap and pulling the straps
toward you š.
2. Open harness clip › .
FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS
FOR YOUR CHILD INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN THE EVENT OF A SHARP TURN,
SUDDEN STOP OR CRASH. Snugly adjust the belts provided with this child restraint around your
child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It
does not press on the child’s flesh or push the child’s body into an unnatural position.
™