Graco NAUTILUS PD101777B - Manual (Page 31)

31
10.0 Securing the Child Restraint in Your Vehicle
10.1 Using Child Restraint WITH Built-in Harness
Lower anchors must be stored when using vehicle belt.
See Section 18.1, Storing LATCH, page 57.
1. Place the child restraint firmly against the back of a
forward-facing vehicle seat.
2. Thread the seat belt through the belt slot openings:
For Lap/Shoulder belt
For Lap-only belt
3. Buckle the vehicle belt. The vehicle belt should not be
twisted.
10.2 With a Vehicle Lap or Lap/shoulder Belt:
FAILURE TO PROPERLY SECURE THE CHILD RESTRAINT IN
THE VEHICLE INCREASES THE CHILD’S RISK OF
SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP
TURN, SUDDEN STOP OR CRASH. Carefully follow these instructions and those in your vehicle
owner’s manual to be sure your child restraint is properly positioned and held tightly at all times.