Global Machinery Company GTX2450K - Manual (Page 7)

7
• Do not store or use the tool and battery pack in
locations where the temperature may reach or exceed
104°F (40°C) such as alongside sheds or metal
structures in the summer.
• The charger is designed for use from a standard
household electrical supply (230–240 volts). Do not
attempt to connect the charger to a supply with a
different supply.
• If you wish to charge a second battery pack, unplug
the charger from the mains supply and leave it for at
least 15 minutes. After this time you can charge a
second battery pack.
Additional safety instructions for the
battery pack
• The battery pack for this tool has been shipped in a low
charge condition.You should charge the battery pack
fully before use.
• To ensure the longest battery life and best battery
performance, always charge the battery when the air
temperature is between 18–24°C. Do not charge the
battery pack when the temperature is below 0°C, or
above 40°C. This is important. Failure to observe
this safety rule could cause serious damage to the
battery pack.
• Do not incinerate the battery pack even if it is seriously
damaged or can no longer hold a charge. The battery
pack can explode in a fire.
• Never attempt to open the battery pack for any reason.
If the plastic housing of the battery pack breaks open
or cracks, immediately discontinue its use and do not
recharge it.
• The battery pack utilizes nickel-cadmium cells.
Cadmium is considered to be a toxic material. Use an
environmentally safe disposal unit at a municipal
waste disposal centre to dispose of a damaged or worn
out battery.