GE WA8616R - Manual (Page 10)

(continued)
How to Use the Filter-Flo Pan
●
The Filter-Flo pan is the lint .
position the Filter-Flo
pan on the agitator after
loading clothes into the
washer. Lint is easily seen
and removed after the wash
is finished.
NOTE: Do not use the Filter-Flo pan as a wash
basket. Do not put items to be washed in the
Filter-Flo pan. Do not place detergent
. . . . . . . .. . .. . .. .
. . .. . ...... .. . . . . ... .. .. .
---- in the Filter-Flo pan.
.<. .. ..,-.: .. .. . .
How to Use the Bleach Dispenser
●
Use this dispenser with
●
Measure bleach carefully.
liquid bleach only.
If you prefer to Here are some recommended amounts:
LARGE WATER LEVEL—1 cup ml)
use powdered
bleach, pour it
into the wash
basket along with
your detergent. Do
SMALL WATER LEVEL—2/3 cup (170 ml) liquid
●
Pour measured amount of liquid bleach directly into
dispenser.
not pour powdered bleach
●
Do not overfill or allow dispenser to overflow.
Avoid splashing. Undiluted bleach can cause
into the bleach dispenser.
fabric damage.
●
Never pour undiluted liquid bleach directly onto
clothes or into the wash basket.
How to Use the Soak Cycle
●
SOAK CYCLE
temperature will
automatically be
●
For a hot or
warm soak, set the
Wash/Rinse Temp.
control to HOT/COLD or WARM/COLD and
turn the Cycle Selector knob to NORMAL in the
Regular Cycles.
Start the washer. After washer fills and begins to
agitate, push in the Cycle Selector knob and turn to
SOAK CYCLE. Pull out the Cycle Selector knob to
complete the cycle.
●
For an extended soak, the washer to fill and
agitate for a few minutes to dissolve the soaking
agent. Then push in the Cycle Selector knob to stop
the washer (keep lid closed) and
to soak for as
long as desired. After desired soak period, out the
Cycle Selector knob to complete the