Graco SnugRide 1760658 - Manual (Page 17)

17
1. Infant restraint comes with four
identical canopy support parts.
Thread one canopy support
completely through sewn
channel
➍.
2. Slide straight end of a
second support into
the straight end of the
first support and snap in
place
➎.
3. Repeat steps one and two for the other canopy
tunnel. The canopy should appear as shown
➏.
4. Attach canopy in the areas between
the infant restraint and the base of
the handle
➐.
4.3 Attaching Canopy
➍
➎
➏
➐