Grizzly G4030 - Manual (Page 26)

-24- G4030 6 1 ⁄
2
" x 10" Metal-Cutting Bandsaw
SECTION 5: ACCESSORIES
Figure 31. H5408 Blade Tensioning Gauge.
H5408—Blade Tensioning Gauge
The Blade Tensioning Gauge ensures long blade
life, reduced blade breakage, and straight cutting
by indicating correct tension. A precision dial indi-
cator provides you with a direct readout in PSI.
Figure 28. Blades
G5451—85 x 3/4 x .032 10 TPI Raker
G5452—85 x 3/4 x .032 14 TPI Raker
G5453—85 x 3/4 x .032 18 TPI Raker
G5454—85 x 3/4 x .032 4-6 Variable Pitch
G5455—85 x 3/4 x .032 5-8 Variable Pitch
G5456—85 x 3/4 x .032 6-10 Variable Pitch
G5457—85 x 3/4 x .032 8-12 Variable Pitch
G5458—85 x 3/4 x .032 10-14 Variable Pitch
H5405—Lenox ® Lube Tube ™
Lenox ® Lube Tube ™ is a stick lubricant designed
to prevent heat buildup. Apply it directly to the
blade to improve overall blade life and productiv-
ity. Can be used on ferrous and non-ferrous met-
als. Biodegradeable, non-toxic, and non-staining
14.5 oz. tube.
Figure 29. Lenox ® Lube Tube ™ .
G5562—SLIPIT ® 1 Qt. Gel
G5563—SLIPIT ® 12 oz Spray
G2871—Boeshield ® T-9 12 oz Spray
G2870—Boeshield ® T-9 4 oz Spray
H3788—G96 ® Gun Treatment 12 oz Spray
H3789—G96 ® Gun Treatment 4.5 oz Spray
Figure 30. GZXdbbZcYZYegdYjXih[dgegdiZXi"
^c\jceV^ciZYXVhi^gdc$hiZZaeVgidcbVX]^cZgn#
Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly
Catalog for other accessories available for
this machine.