GN Netcom E2555 - Manual (Page 16)

29
Answering System Operation
28
Answering System Operation
Message playback (at base)
Press
PLAY/STOP
to hear messages. The system
announces the number of messages, then begins playback.
If you have new messages waiting, you will hear only the
new messages (oldest first). If there are no new messages,
the system will play back all messages (oldest first).
Announcements
• When playback begins, you will hear the number of
messages waiting.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear “End of messages.”
If the system has less than 5 minutes of recording
time left, you will hear time remaining.
Options during playback
• Press
VOLUME
button to adjust speaker volume.
• Press
SKIP
to skip to next message (or hold down to
speed up message playback).
• Press
REPEAT
to repeat message currently playing.
Press twice to hear previous message. (Hold down
to slow message playback).
• Press
DELETE
to delete message being played back.
• Press
PLAY/STOP
to stop playback.
To delete all messages
To delete all messages, press and hold
DELETE
while
the phone is idle (not during a call, or during message
playback).
1
“You have [xx] new
and [xx] old messages”
Number of messages waiting
(or, during playback, message
number currently playing)
14
Message playback begins. See
options at right.
2
Message playback ends.
NOTE: If “F” is flashing in
the message window, memory is
full. You will have to delete some
messages before new ones can
be received.
NOTE: New (unheard)
messages cannot be deleted.
Press PLAY/STOP to begin or
end message playback
Changing feature options
Menu features can be changed to customize how the
answering system operates. Press
MENU
repeatedly to
hear each feature. Press
CHANGE
when you hear the
feature you want to modify.
Feature options (Default settings underlined)
System announces: Feature description:
1 MENU
3 MENU
Or
Press until desired feature
is heard(see list at right)
Press until desired selection
is heard
Press to set selection and
move to next menu option
Press to set selection and
exit menu
2 CHANGE
“Change Announcement”
Options: [record announcement]
“Change remote access code”
Options: [enter 2-digit code] 19
“Change message alert”
Options: On / Off
“Change announce only”
Options: On / Off
“Change call screening”
Options: On / Off
“Change number of rings”
Options: 2 / 4 / 6 /Toll Saver
Record your outgoing announcement
(see page 26).
Enter a 2-digit number (10-99) for remote
access from another phone (see page 33).
When on, the telephone beeps every 10
seconds when you have new messages.
When on, callers hear an announcement
but cannot leave messages (see page 27).
When on, you can hear callers leave
messages, or answer the call.
Choose number of rings before the system
answers a call. When Toll Saver is active,
the system answers after 2 rings if you
have new messages, and after 4 rings if
you have no new messages.
NOTE: Press and hold CHANGE to advance the remote access code
number by 10.
(Play/Stop)
(Play/Stop)
(Play/Stop)