GE 26993 - Manual (Page 40)

40
C
ORDLESS
P
HONE
S
OLUTIONS
(
CONTINUED
)
Problem Solution
Unit beeps • Place handset in base for 20 seconds; if it still beeps,
charge battery for 12 hours.
• Clean charging contacts on handset and base with a soft
cloth, or an eraser.
• See solutions for “No dial tone.”
• Replace battery.
Memory Dialing • Did you program the memory location keys
doesn't work correctly?
• Did you follow proper dialing sequence?
C
ALLER
ID
Problem Solution
No Display • Is battery fully charged? Try replacing the battery.
• Make sure that the unit is connected to a non-switched
electrical outlet. Disconnect the unit from the plug and
plug it in again.
• Did you order Caller ID service from your local telephone
company? The display won't work unless you order Caller
ID service from your phone company.
Caller ID Error Message • The unit displays this message if it detects anything other
than valid Caller ID information during the silent period
after the first ring. This message indicates either the
presence of noises on the line, or that an invalid message
has been sent from the telephone company.