Global Machinery Company NTS2000A - Manual (Page 6)

6
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Assembly
The BGSTAND needs to be assembled prior to use,
assembly will take approximately 20 minutes.
Required Tools
The following tools are required:
• 5mm hex key (supplied)
• 8mm hex key (supplied)
• Phillips head screwdriver (not supplied)
• Wrench (not supplied)