Important safeguards – Gaggia Espresso/Cappuccino Maker User Manual

Page 11

Advertising
background image

be seen in the Description of Parts. The outer jacket of nozzle can be removed by
pulling downward.

The steam jet is cleaned by running a shot of

A cleaning needle

has been supplied to clear any obstruction. Outside of steam pipe can be cleaned with a

damp cloth. Hole in steam nozzle must be kept open. A needle may be used.

Clean filter holder and titer basket in warm water after use.

Wipe body of machine with a damp cloth as required.

Remove drip tray and plate (16,

and

clean out drip area.

wash in warm soapy water. Use sponge to

Ground coffee will adhere to the seal

inside of the brew head

Keep it clean.

The shower head (12) should be
frequency of use.

unscrewed and cleaned periodically depending on

After long periods of non-use, drain stale water from machine by turning hot
water/brew switch to “On”. However, do this only after you have filled reservoir
with fresh water. Never operate pump unless there is water in reservoir

NOTE: It is very normal for an espresso machine to emit steam

drip

occasionally as the water pressure changes during use. Be certain to empty drip tray

(16) as required.

)

e

e

In hard water areas, minerals found in the water will accumulate and

operation of the unit. Approximately every four months (this can

on use

and water condition), clean the machine with Gaggia descaler

which case fo ow the

instructions on the packet).

Remove shower head (12) and 1

c ean. Pour solution into reservoir and turn on

pump for

15

seconds.

Allow solution to flow through brew head and steam nozzle for several seconds.

Wait 20 minutes and repeat. Repeat process until solution has been run through. Rinse

machine

by running plain cold water through machine. Replace shower head.

NOTE: Product

due to scale accumulation is not covered

by

No

other servicing should be attempted by the user. Use

cleaner” for best results.

Important safeguards

When using electrical appliances, basic safety precautions should always

be followed to reduce the risk of fire, electric shock, and/or injury to persons,
including the following:

courtesy of

www.espressotec.com

Advertising